- Next day delivery
- Installation service available
- Buy back on all products
- Rated Excellent
- 3D View
- 3D View
- Ideal for road and construction site safety
- Compatible with mesh fence panels, hoarding and gates
- Proven to withstand wind speeds of up to 72mph
- Light and easy to move when empty
- Creates a flat, solid wall when connected
- Hire or Buy
- Interlocking system
- High visibility
- Wind resistant
This is an excellent, low containment water filled barrier system. Before being filled with water, the barrier weighs just 35 kg and so can be moved with relative ease. Once the barriers are filled their weight is increased to 400kg.
The RB2000 Barrier has been wind tunnel tested at the prestigious Mira facility and proven to with stand high wind speeds both with and without mesh panels. As with other water filled barriers in the range, the RB2000 can be used with hoarding, mesh panels, vehicle, and pedestrian gates. When mesh and fence panels are added the overall height of the system is increased to 2.1m.
The barriers are designed with a patented five position interlocking system and can be positioned in straight lines and flows smoothly around bends and corners. Designed with a patented five position interlocking system, the barrier can be positioned to create a flat solid wall across uneven surfaces.
Once the barriers are filled, they weigh up to 400kg and so very hard to move. They are made from prime polythene and can be used time and time again.
The wind tunnel testing demonstrated that three RB2000 Barriers were able to withstand wind speeds of up to 71mph, add a mesh fence panel to a barrier and it will continue resist wind speeds of up to 70 mph.
Additional safety lights may be mounted onto this water filled barrier system to ensure top level visibility. The barriers are also supplied in red and white as standard and front/end stops can be supplied to prevent trip hazards.
RB2000 barrier install guide:
The RB2000 Barriers are very straight forward to install, simply follow these steps:
Step 1 – Position the RB2000 barriers along the desired perimeter line. Lift the end of each barrier up and over the top of the neighbouring barrier. They should slot readily into place.
Step 2– Open the cap at the top of the barrier and fill with water, then replace the cap.
Step 3 – To insert mesh fence panels, position the panels over the top of the barriers so that poles line up with the holes at the top of the barriers. Gently slide the poles into position and check that they go through both the top holes on top of the barrier and mid-way through. Each mesh fence panel should line up with the panels next to it.
Step 4 – Next, add a coupler to the bottom and top section of the mesh fence panel. Secure the coupler in place using an impact driver or coupler spanner. Anti-tamper versions of the couplers are also available.
To empty the barriers, you need only to release the bung at the bottom of the barrier using the bung key.
These robust, heavy-duty barriers can be hired, purchased, delivered and installed nationwide. Contact us today for no obligation advice and a free project quote.
Request a free no-obligation quote
We respond in under 30 mins on average (excl. weekends)
The SafeSite promise
We are sure that you will be happy with our services, but if for any reason you are not, we will be sure to make it right for no extra cost!
- Nationwide coverage
- Completely free, no-obligation quotes
- The most competitive pricing
- Industry-leading reputation & accreditations
Prices vary by quantity and delivery location